ok i just got my windows tinted and the dot matrix screwed the tint up so i want to know what to do about it. i dont know what to do because i have been given ideas to just cut the tint off where the dot matrix starts but i dont know if i should do that because i dont know what it will look like. and also i was thinkin about covering it up with a red banner across the back window but i dont know about that either.(i have a red car) and if i put the red banner on it i could put one on the front but i think it would still look stupid.you guys got any ideas. thanks in advanced for any suggestions-
steven

 

same thing happend on my tint on my dot matrix it sucks there isnt anything you can do about it i dont think i tried using a hairdryer and a flat plastic edge thing it didnt really help to much it pushed alot of the bubbles down is all...

sucks!

 

I would cut it off and put a vinyl stripe across it. I had one put on when I first got mine tinted and it turned out great.

 

can i by chance see any pics of any ideas or things you have done to cover it up

 

don't know what to do about the dot matrix but don't put the red strips on. They look like crap. The vinal strip might work. Now that i think about it I have heard of people painting over it but I don't know how well that would work.

 

paint works fine. I suggest taking it to a shop and asking to see some of their work where they have painted over something like that and going from there. When it comes to looks of your car things like DIY tint is NOT the way to go =)

 

r u talkin about a tinted vinyl strip or what i dont know what kinda vinyl you are talkin about

 

i got mines tinted...the dot matrix looks real bad...unless you want to take something and push the tint around each dot, thats how its gonna be.

 

so should i cut it of and try and find someting to cover it up with

 

i've got the saem problem with my car and heard that you can also sand the dot matrix down and then apply the tint on top of it