can anyone help me out, does anybody know where to find the installation instruction for the cold air intake for integras on the net? thanks!

 

take off strut bar,take of stock intake,take of resonater(in bumper),instal CAI
the air box has screws holding it in,and the intake is clamped onto the throttle body,the vaper return line is that hose going from your valve cover to your intake,reatach that to your new one,do not buy an air breather,unless you are turbo.
that help any? have fun

 

jdmfan.com/technical/performance/aem_intake/

these are pretty good instructions, I didn't have a problem

 

hey, this website you gave me doesn't work, can you check to make sure it is correct. thanks a lot

 

yea it's right.. it must be down right now cuz I couldn't get it to come up either, I guess try in a couple days.

 

go to www.team-integra.net and register an account then go to the articles section. it has a full article with instructions and stuff on how to do everything!

 

You need to remove your front bumper...remove the strut bar (If any) remove the stock intake and resonator, remove the coolant resevoir and bracket, then you put the bottom part of the intake in first and then move the pipe around to get it to properly fit. Once you get everything stock of from the stock intake putting the CAI on is very, very easy!

 

You don't need to remove the front bumper. It can be done without having to do so.

 

You need to remove the front bumper to pull out the resonator...if you could get the resonator out without taking off the front bumper I would really like to know.

 

Yes you can do it without taking off the bumper. Thats what I did. Just go to team-integra.net and check out the article on the CAI install. its easy!