Can anyone tell me the parts needed to mount an OEM 97 ITR lip?
02-13-2003, 07:12 AM
#1
Moderator
Thread Starter
Join Date: Dec 2000
Posts: 21,573
Likes: 0
Received 0 Likes
on
0 Posts
Can anyone tell me the parts needed to mount an OEM 97 ITR lip?
i'm not entirely clear on what i need from this pic:
but i'm guessing i'll need a bunch of 28 and 36.. part #s would be very useful too.
tia.
but i'm guessing i'll need a bunch of 28 and 36.. part #s would be very useful too.
tia.
02-13-2003, 11:51 AM
#2
Senior Member
Join Date: May 2002
Location: Bay Area
Posts: 4,792
Likes: 0
Received 0 Likes
on
0 Posts
what you need is two screws that will go into the lower piece by the wheel (corners of the lip) and i believe it was 7 bolts that will bolt it up from the bottom part numbers 6 and 28 im guessing.
02-13-2003, 06:44 PM
#5
Moderator
Thread Starter
Join Date: Dec 2000
Posts: 21,573
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Zedron
Hey never underestimate the power of a zip tie..I once put up a chainlink fence with those and it still stands today :-) after 3 years of hot florida sun.
Hey never underestimate the power of a zip tie..I once put up a chainlink fence with those and it still stands today :-) after 3 years of hot florida sun.
now when you guys say 6, don't you mean 36? 6 is the lip.
h:
