Notices

90 LS starting problems

Thread Tools
 
Old Jun 29, 2009 | 11:14 AM
  #1  
thewhitenoise's Avatar
thewhitenoise
Thread Starter
Junior Member
 
Joined: Jun 2009
Posts: 3
Likes: 0
From: olympia washington
Default 90 LS starting problems

my 90 LS wont start on its own when its hot. I can jump start it or push start it. replaced plugs, cap, rotor, battery leads, and wires. batter and alternator tested strong. when It doesn't start I don't get spark. its driving me crazy. it doesn't make sense that I can jump start it. -mike-
Reply
Old Jun 29, 2009 | 11:31 AM
  #2  
TheOtherDave™'s Avatar
TheOtherDave™
Apathy Kills
 
Joined: Nov 2002
Posts: 60,714
Likes: 0
From: The Left Lane
Default

Have you tested / replaced the main relay lately?
That's my first intuition, since you're confident you're getting fuel.
__________________
:: :ToDspin: - supermod - but who gives a shit?

:: HAN Integra FAQ: If, by some miracle, yours hasn't been stolen... check it out!
Reply
Old Jun 29, 2009 | 12:06 PM
  #3  
thewhitenoise's Avatar
thewhitenoise
Thread Starter
Junior Member
 
Joined: Jun 2009
Posts: 3
Likes: 0
From: olympia washington
Default

Originally Posted by TheOtherDave(TM)
Have you tested / replaced the main relay lately?
That's my first intuition, since you're confident you're getting fuel.
not positive about the fuel. I don't have pressure gauge. but I can jump start from a strong battery. will check main relay today
Reply
Old Jun 30, 2009 | 07:13 AM
  #4  
thewhitenoise's Avatar
thewhitenoise
Thread Starter
Junior Member
 
Joined: Jun 2009
Posts: 3
Likes: 0
From: olympia washington
Default

Originally Posted by thewhitenoise
not positive about the fuel. I don't have pressure gauge. but I can jump start from a strong battery. will check main relay today
PROBLEM SOLVED
it was the PGM-FI relay! added a little sodder to the cracked joints and bam started right up. thanks for the tip
-mike-
Reply




All times are GMT -8. The time now is 09:07 PM.