Notices

please dont cut off

Old Jan 14, 2009 | 01:35 PM
  #1  
fas280z's Avatar
fas280z
Thread Starter
Junior Member
 
Joined: Jan 2009
Posts: 3
Likes: 0
From: portsmouth,virginia
Default please dont cut off

91 acura integra LS! VEHICLE ALWAYS STARTS WHEN COLD BUT ONCE AT OPERATING TEMP IT SOMETIMES CUTS OFF EVEN WHEN DRIVING. IT WILL RESTART AFTER IT COOLS DOWN. FELT AS IF MAYBE IT COULD HAVE BEEN DISTRIBOTOR SO I REPLACED IT, STILL PROBLEM PRESIST. HELP!!!!
Reply
Old Jan 14, 2009 | 02:26 PM
  #2  
pslsnakes's Avatar
pslsnakes
F#%K JDM, USDM FTW
 
Joined: Apr 2008
Posts: 538
Likes: 0
From: Garage kept in Florida
Default

Caps lock hurts my eyes!!!!

Sounds like the ICM, but you said you already replaced the dizzy. Was it a brand new one will all new components?
Reply
Old Jan 15, 2009 | 12:13 PM
  #3  
fas280z's Avatar
fas280z
Thread Starter
Junior Member
 
Joined: Jan 2009
Posts: 3
Likes: 0
From: portsmouth,virginia
Default

no it was a used one,u think that was a bad idea
Reply
Old Jan 15, 2009 | 01:13 PM
  #4  
pslsnakes's Avatar
pslsnakes
F#%K JDM, USDM FTW
 
Joined: Apr 2008
Posts: 538
Likes: 0
From: Garage kept in Florida
Default

It could be.. A Honda will run forever, so as long as you have a bunch of coils.
Reply
Old Jan 15, 2009 | 02:14 PM
  #5  
fas280z's Avatar
fas280z
Thread Starter
Junior Member
 
Joined: Jan 2009
Posts: 3
Likes: 0
From: portsmouth,virginia
Default

well i have an external coil and msd 6al. u think it could be the the pgm-fi relay
Reply
Old Jan 15, 2009 | 06:44 PM
  #6  
AcuraLsSE's Avatar
AcuraLsSE
ASE Certified
 
Joined: Nov 2005
Posts: 1,428
Likes: 1
From: The 503
Default

Is it making any valve noises? Sometimes when there is low clearance in the valve guides they can stick cuz they expand when the car heats up. If more then one is staying open it can cause the car to sputter and die.
Reply
Old Jan 15, 2009 | 08:26 PM
  #7  
cruzalekz's Avatar
cruzalekz
Registered User
 
Joined: Aug 2005
Posts: 642
Likes: 0
Default

common issue is the main relay. they heat up and does not do the job anymore. so my suggerstion is to get a new one.
Reply



All times are GMT -8. The time now is 02:40 PM.