Notices

Accessing Climate Control bulbs?

Thread Tools
 
Old Dec 22, 2002 | 12:47 PM
  #1  
macross81's Avatar
macross81
Thread Starter
Junior Member
 
Joined: Jul 2002
Posts: 3
Likes: 0
From: San Diego
Default Accessing Climate Control bulbs?

Hei, I am attempting to replace a burned out bulb under the a/c section of the climate control on a 96 Integra LS. Does anyone what's required to remove this area? I don't want to break anything in the process. Any help would be appreciated.
Reply
Old Dec 23, 2002 | 08:54 PM
  #2  
Psychosis's Avatar
Psychosis
Meber
 
Joined: Oct 2002
Posts: 80
Likes: 0
From: Central NY
Default

Pick up a haynes/chilton manual... should explain it pretty well.
I have the same problem, one of these days I gotta fix that damn thing :/
Reply
Old Dec 25, 2002 | 02:26 PM
  #3  
98Civichb's Avatar
98Civichb
Junior Member
 
Joined: Dec 2002
Posts: 26
Likes: 0
Default

To take off your climate control, you pop off the Hazard and Defrost buttons with a screwdriver (be careful not to break anything) and then I think there are a couple screws in there. Then you just pop the whole thing off.. I forgot if there are bulbs under there though hehe
Reply
Old Dec 26, 2002 | 05:19 AM
  #4  
SimplyFast's Avatar
SimplyFast
I'm like dis...
 
Joined: Mar 2002
Posts: 39
Likes: 0
From: St. Louis
Default

you also have to disconnect the cable that hooks to the hot/cold slider.
Reply




All times are GMT -8. The time now is 09:52 AM.