Antenna has no power because a loose cable??
#1
Junior Member
Thread Starter
Join Date: Oct 2008
Location: Oxnard, CA
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
Antenna has no power because a loose cable??
I have this problem with my cars antenna, and when I removed all the interior panels to see what was wrong with it, I notice that there was a cable hanging out loose and I try finding where it goes but didn't find anything so my question is where does this cable goes connected to? I post a pic if needed.
#2
Apathy Kills
Can you post a larger picture, please?
It's impossible to read the text in that pic.
Also, it'd help to know the color of the loose wire.
It's impossible to read the text in that pic.
Also, it'd help to know the color of the loose wire.
__________________
:: :ToDspin: - supermod - but who gives a shit?
:: HAN Integra FAQ: If, by some miracle, yours hasn't been stolen... check it out!
:: HAN Integra FAQ: If, by some miracle, yours hasn't been stolen... check it out!
#4
If it's a white cable with gear teeth on one side then it's the antenna cable. If thats the case then just disassemble the motor assembly and remove the whole antenna mast and cable and replace with a new one when the motor is installed in the car.
#5
Junior Member
Thread Starter
Join Date: Oct 2008
Location: Oxnard, CA
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
No is not the mast, everything works but it just needs power in order to work so I think that that black wire in the pic is the one responsible for it.
#7
I have this problem with my cars antenna, and when I removed all the interior panels to see what was wrong with it, I notice that there was a cable hanging out loose and I try finding where it goes but didn't find hid bulb anything so my question is where does this cable goes connected to? I post a pic if needed.