Question: Wheels or Lower?
Originally posted by nc2tarheels
Get both at the same time. I had some Neuspeed springs and lowered my car on stock wheels. Then I decided to get 18's and put them on and the car was TOOOO LOW. The fenders sat on the tires. So I had to take those off (springs) and get some coilovers so then I had to wait on them to get here and then put them on. So I had to pay for
~Neuspeed Springs $100
~Wheels and Tires $1600
~Alignment $60
~Fix an Axle $100
some idiot ****ed
up while putting
the springs on my
car. (Not the shop)
~Ground Controls $350
~Overnight Shipping $35
~New Alignment $60
~Camber Kit $120
~Install Camber Kit $60
**All Together Around $2500!!!!
Get both at the same time. I had some Neuspeed springs and lowered my car on stock wheels. Then I decided to get 18's and put them on and the car was TOOOO LOW. The fenders sat on the tires. So I had to take those off (springs) and get some coilovers so then I had to wait on them to get here and then put them on. So I had to pay for
~Neuspeed Springs $100
~Wheels and Tires $1600
~Alignment $60
~Fix an Axle $100
some idiot ****ed
up while putting
the springs on my
car. (Not the shop)
~Ground Controls $350
~Overnight Shipping $35
~New Alignment $60
~Camber Kit $120
~Install Camber Kit $60
**All Together Around $2500!!!!
Shingo,
Man, I hear you... In my case, yes, I want a clean image with my car. Every project I have ever worked on, I have tried to make a change that was my own, without making it look ghetto (with the exception of my Monte Carlo in HS, but that is another story).
I agree with the hyperblinker and altezza comments, I mean, you might as well pick up some APC and other huge graphics and stick them all over the body and across the windshield, even though you have none of those products on the car....
With my Teg, I made the choice to get wheels first, partially encouraged by my wifey because she, as well, agreed the stock 14" hubcaps sucked. I picked a wheel that complemented the car as it made a bigger impact on the appearance of the car (in my opinion).
And I would lower the car right now, but I wouldn't be able to pull into my garage if I didn't. I'm dragging ass as it is......
Peace.
-c
Man, I hear you... In my case, yes, I want a clean image with my car. Every project I have ever worked on, I have tried to make a change that was my own, without making it look ghetto (with the exception of my Monte Carlo in HS, but that is another story).
I agree with the hyperblinker and altezza comments, I mean, you might as well pick up some APC and other huge graphics and stick them all over the body and across the windshield, even though you have none of those products on the car....
With my Teg, I made the choice to get wheels first, partially encouraged by my wifey because she, as well, agreed the stock 14" hubcaps sucked. I picked a wheel that complemented the car as it made a bigger impact on the appearance of the car (in my opinion).
And I would lower the car right now, but I wouldn't be able to pull into my garage if I didn't. I'm dragging ass as it is......
Peace.
-c
Originally posted by Paulll
thats a **** load for rims/tires
thats a **** load for rims/tires
she is driving a 00 SE, so it should have the gs-r rims on it. so i would say lower it now, using something along the lines of Eibach Pro-lines. that way, if she did decide to get after market wheels, the chances of rubbing are very slim.
personally, i would slap some nice tires(BFG G-force maybe) on the stocks rims, get some GC coilovers(so i can raise lower depending if it has snowed here) with KYB AXG's. and there you go, a good looking, sweet handling car.
cdowny00,
Have you seen Getaway in Stockholm 3 yet? They finally have aerial footage.....
FYI.....
Stockholm Getaway 2 is the coolest movie I have ever seen. Two crazy ass drivers with 450 hp turbo supra and turbo ford tearing up stockholm and running from police! Stockholm Getaway 1 was pretty cool ( porsche 911 ) but not as...Look it up
FYI.....


