Notices

Pulley snapped on 95 GS-R(type r replica)

Thread Tools
 
Old Nov 27, 2007 | 12:13 PM
  #1  
Haste The Day's Avatar
Haste The Day
Thread Starter
Member
 
Joined: May 2005
Posts: 169
Likes: 0
Default Pulley snapped on 95 GS-R(type r replica)

Driving down the road, and I hear a loud thump,pull into the gas station, pop the hood and see a pulley sitting crooked. Look down and theres no longer an a/c belt as well. Just curious as to what pulley this is and what i can do to fix it. Car runs fine just not sure what snapped on it. Any help is appreciated.






Reply
Old Nov 27, 2007 | 03:07 PM
  #2  
Provocateur's Avatar
Provocateur
On permanent hiatus
 
Joined: Jul 2004
Posts: 9,716
Likes: 0
From: A forum with actual tech
Default

That is the A/C idler pulley.

I have heard of the bolt snapping off like that. See if you can extract it and replace it with a new OEM one.

Until it gets hot again and you need A/C, it can wait to be replaced.
Reply
Old Nov 27, 2007 | 07:04 PM
  #3  
Haste The Day's Avatar
Haste The Day
Thread Starter
Member
 
Joined: May 2005
Posts: 169
Likes: 0
Default

Originally Posted by Provocateur
That is the A/C idler pulley.

I have heard of the bolt snapping off like that. See if you can extract it and replace it with a new OEM one.

Until it gets hot again and you need A/C, it can wait to be replaced.
Awesome. So there is no harm in driving it without it? Nice to hear. I thought i would have to store it for the winter a tad early. Thanks for the reply.
Reply
Old Nov 28, 2007 | 03:59 AM
  #4  
bnuk's Avatar
bnuk
Senior Member
 
Joined: Feb 2003
Posts: 1,863
Likes: 0
From: pittsburgh.
Default

just make sure your alternator belt is still there. If you still have two belts you are good.
Reply
Old Nov 28, 2007 | 06:52 AM
  #5  
Haste The Day's Avatar
Haste The Day
Thread Starter
Member
 
Joined: May 2005
Posts: 169
Likes: 0
Default

Yeah both other belts are still intact and in place.
Reply




All times are GMT -8. The time now is 09:49 PM.