i cant figure out how to tighten up the ac belt on this 95 integra LS

i dont see any tensioner for this?

does anyone now how?

 

There's a tensioner just above the compressor. It's a bolt that sitcks out of the engine mount/compressor bracket and is held in place by a nut. You need to loosen the nut to turn the bolt. It adds/removes tension on a pulley that is pressed against the belt.

 

i see the hole for this bolt but there is no bolt in it! its missing

 

That belt has to be completely limp then or you're lucky that the bolt holding the pully hasn't come loose. Hit up a junk yard for the bolt or a dealership. You could also likely get one here: www.acuraautomotiveparts.org