My Teg has been in storage for about 10 years in a garage on a property that had the garage dug into the earth. 3 sides masonry walls, if that makes sense, increased the moisture the poor vehicle was stored in. Anyways, the under body had some unusual rust, which I dropped the fuel tank, replaced it, and took care of the under body rust in the area. During all this, the 3 fuel lines under the mid-body which were rusted out, broke. I repaired the lines with copper fuel lines and unions. Upon turning the key priming the engine, i heard pressure build and blow out under the vehicle, around the fuel tank. There is a possibility that a may have crossed the 2 smaller fuel lines (Evap lines) I'm just wondering if anyone with more experience have any easy ways to tell which line is which, or have a better image/s than what the Service Manual has, to make this easier on me. I work so much as it is, my time is always limited. Thanks in advance.