Ok, for the past couple of weeks I have had to once in a while pop start my 94 GS-R. Well last Thursday it completely stop starting, all I can do is pop start it now. Trouble shooting steps I have taking are:

1. Took out the start and had NAPA Test it (Starter is Good)
2. Checked my ignition switch by putting a test light to each soldering point, the test light lite on every key position.

I don’t know how to test my clutch safety switches. I’m thinking it must be the upper one but I’m not sure? Any Idea’s

 

its most likely ur clutch netural swtch. just look under the dash near the pedal and there should be a button and when u push the pedal it should push in the button so check to make sure thats good if not u can remove the wires bypass it and try to start it.

 

Ok, dumb question! When I look at the end of the connector it looked like it had 4 connections on the end of it...? How do I jump that, which one do I loop together?