my integra is getting power to the distributor but doesnt get a spark to the plugs. I changed the cap, rotor and plugs, but still no spark.. Do I need a whole new distributor or do I just need the coil?

 

I had this same problem less than a week ago , i would suggest gettin a simple haynes manual and a digital multi meter , look up all the voltage and test ur coil before spendin extra money on a whole new coil whic is like $230 with a return at autozone. well i hope its just ur coil man good luck , peace

 

I had a similar problem with my distributor also. What turbovic said is a good idea but I would check your ignitor/ ignition module. Good luck.

 

Spend the extra $, ditch the haynes, and buy a real manual...HELMS