s2k Retrofit...
Pull my finger
Joined: Apr 2004
Posts: 41,423
Likes: 0
From: Arizona
Originally Posted by 90CvcDX
So i've always wondered this, why is there that little part on the beam of light where its higher than the rest of the light? BTW great looking retrofit
I'm guessing your asking while the likes tilt sort of like this / /
It's so you don't blind on coming drivers
In Europ and other palces where they drive on the left side of the road the beams are angled like \ \...
Get it?
h:
Junior Member
Joined: Dec 2005
Posts: 20
Likes: 0
Good to hear that you are happy with the service Ali.
We had a good time, and it was fun hanging with you...even to the late ours and cooking dogs with the heat gun.
The last two pictures...the wall shots against the brick wall...are the ones before we corrected the way the bulb was sitting...remember..because of the way the ballast was positioned creating tension on the bulb holder.
Once we tightened the clip the cutoff got sharper; as the pictures agianst the fense clearly shows a sharper cutoff.
PS...what's up Dave? Thanks for everything.
Thanks again Ali
Bjorn
We had a good time, and it was fun hanging with you...even to the late ours and cooking dogs with the heat gun.
The last two pictures...the wall shots against the brick wall...are the ones before we corrected the way the bulb was sitting...remember..because of the way the ballast was positioned creating tension on the bulb holder.
Once we tightened the clip the cutoff got sharper; as the pictures agianst the fense clearly shows a sharper cutoff.
PS...what's up Dave? Thanks for everything.
Thanks again Ali
Bjorn
Pull my finger
Joined: Apr 2004
Posts: 41,423
Likes: 0
From: Arizona
Originally Posted by 90CvcDX
yeh thanks. 
h: I was jumping back and forth between replying and my drawings 
Originally Posted by -Bionic-
Good to hear that you are happy with the service Ali.
We had a good time, and it was fun hanging with you...even to the late ours and cooking dogs with the heat gun.
The last two pictures...the wall shots against the brick wall...are the ones before we corrected the way the bulb was sitting...remember..because of the way the ballast was positioned creating tension on the bulb holder.
Once we tightened the clip the cutoff got sharper; as the pictures agianst the fense clearly shows a sharper cutoff.
PS...what's up Dave? Thanks for everything.
Thanks again Ali
Bjorn
We had a good time, and it was fun hanging with you...even to the late ours and cooking dogs with the heat gun.
The last two pictures...the wall shots against the brick wall...are the ones before we corrected the way the bulb was sitting...remember..because of the way the ballast was positioned creating tension on the bulb holder.
Once we tightened the clip the cutoff got sharper; as the pictures agianst the fense clearly shows a sharper cutoff.
PS...what's up Dave? Thanks for everything.
Thanks again Ali
Bjorn
Thread Starter
Senior Member
Joined: Apr 2005
Posts: 232
Likes: 0
Originally Posted by -Bionic-
Good to hear that you are happy with the service Ali.
We had a good time, and it was fun hanging with you...even to the late ours and cooking dogs with the heat gun.
The last two pictures...the wall shots against the brick wall...are the ones before we corrected the way the bulb was sitting...remember..because of the way the ballast was positioned creating tension on the bulb holder.
Once we tightened the clip the cutoff got sharper; as the pictures agianst the fense clearly shows a sharper cutoff.
PS...what's up Dave? Thanks for everything.
Thanks again Ali
Bjorn
We had a good time, and it was fun hanging with you...even to the late ours and cooking dogs with the heat gun.
The last two pictures...the wall shots against the brick wall...are the ones before we corrected the way the bulb was sitting...remember..because of the way the ballast was positioned creating tension on the bulb holder.
Once we tightened the clip the cutoff got sharper; as the pictures agianst the fense clearly shows a sharper cutoff.
PS...what's up Dave? Thanks for everything.
Thanks again Ali
Bjorn
yeah man...been caught up with a lot of work, didnt get a chance to post the pics and write a review about my experience...ohh by the way...cant ever forget cooking dogs with the heat gun....now how often would i ever ge to do that....thumbs up for Bjorn and Rich!!!!! plus i might have few more projects coming up for u in a month or so...il holla at you for sure!!!!
Thread Starter
Senior Member
Joined: Apr 2005
Posts: 232
Likes: 0
Originally Posted by RicoD
And sorry for the mi-spellings, glad you understood that comment h: I was jumping back and forth between replying and my drawings
Do you guys happen to do other makes/models? Or atleast considering the service for additional fee?
h: I was jumping back and forth between replying and my drawings Do you guys happen to do other makes/models? Or atleast considering the service for additional fee?
www.customlightz.com
Pull my finger
Joined: Apr 2004
Posts: 41,423
Likes: 0
From: Arizona
Originally Posted by jdm-power
they do all makes and models...check his website out...youwould get a better picture
www.customlightz.com
www.customlightz.com
These will have a future customer under the 325 bracket
got boost?
Joined: Jan 2005
Posts: 2,346
Likes: 0
From: somewhere
Originally Posted by -Bionic-
Good to hear that you are happy with the service Ali.
We had a good time, and it was fun hanging with you...even to the late ours and cooking dogs with the heat gun.
The last two pictures...the wall shots against the brick wall...are the ones before we corrected the way the bulb was sitting...remember..because of the way the ballast was positioned creating tension on the bulb holder.
Once we tightened the clip the cutoff got sharper; as the pictures agianst the fense clearly shows a sharper cutoff.
PS...what's up Dave? Thanks for everything.
Thanks again Ali
Bjorn
We had a good time, and it was fun hanging with you...even to the late ours and cooking dogs with the heat gun.
The last two pictures...the wall shots against the brick wall...are the ones before we corrected the way the bulb was sitting...remember..because of the way the ballast was positioned creating tension on the bulb holder.
Once we tightened the clip the cutoff got sharper; as the pictures agianst the fense clearly shows a sharper cutoff.
PS...what's up Dave? Thanks for everything.
Thanks again Ali
Bjorn
YOur work speaks for itself!!! glad that other people are taken advantage of your great work, and happy i can throw my hand in it, after all i am the first color modded s2k done!!! whop whop