Notices

height...

Thread Tools
 
Old Jun 23, 2006 | 01:21 PM
  #1  
Integra89's Avatar
Integra89
Thread Starter
Senior Member
 
Joined: Feb 2006
Posts: 129
Likes: 0
From: B-creek
Default height...

So...i lowered my teg while ago maybe month or two ago and it appears that one side is sitting lower then they other... can this be? how back this be**?
Reply
Old Jun 25, 2006 | 02:41 AM
  #2  
Kai's Avatar
Kai
Rotorphile.
 
Joined: Mar 2002
Posts: 10,120
Likes: 0
From: Richmond, VA
Default

We need more details. How did you lower it? What year Integra, an '89 like your handle suggests?
Reply
Old Jun 25, 2006 | 07:31 AM
  #3  
Integra89's Avatar
Integra89
Thread Starter
Senior Member
 
Joined: Feb 2006
Posts: 129
Likes: 0
From: B-creek
Default

its a '98 i put ky2-gr2 strust and vodtland springs...they came with but it looks as if the left side sits slightly lower but you can still see the difference can this be?
Reply
Old Jun 25, 2006 | 08:36 AM
  #4  
KaBlookie's Avatar
KaBlookie
4-doors ROCK
 
Joined: Mar 2005
Posts: 251
Likes: 0
From: Philly suburb
Default

Check all your nuts and bolts related to the mounting of the suspension, make sure everything's nice and tight. Make sure that the front shocks are fully seated in the forks too.

If everything checks out, then you may have a bum set of springs...I was initially thinking that maybe by accident the fronts were placed on one side and the rears on the other, but if that was the case, one side would be very noticeably higher than the other, not just a slight difference.

Other than that, I'm not really sure what it could be...
Reply




All times are GMT -8. The time now is 09:16 PM.