how much of a pain in the ass is it gonna be to put this manifold on..i have had it for 2 weeks and i want to get the damn thing on..i got it off a friend..he took it off his wrecked gsr and left the throttle body,coolant line,and all the wire hook ups? is there anything else i need..b/c i wanna get the damn thing on..help me out if you have any ideas thanks

 

pull the motor first then put it on, i waited till i pulled my engine to put my blox on. very little room back there

 

yea i dont wanna do all that, i can get to most of the bolts but 2-3 of them are gonna be a bitch..but other than that..i should be alright..i think/hope

 

Schmoo can do this in about 20mins. Ask him what he did, he's done it quite a bit.

 

Yep.

Once the mounting bracket for the stock manifold is undone, it is easy. You will have to get underneath the car, remove the oil filter and use a 12mm socket wrench to get two nuts that cannot be accessed from the top.

You will need an ITR throttle cable, ITR throttle cable bracket and a non-GSR throttle pulley if you want it to work correctly.

Here is a good writeup: http://technet.ff-squad.com/how-to/sk2im/