Type R shift boot
05-10-2006, 09:46 AM
#2
I missed Sean
Join Date: Aug 2004
Location: Fairfield/Bridgeport CT
Posts: 11,285
Likes: 0
Received 1 Like
on
1 Post
i'd imgine that you wold have to first unscrew the shifter knob then remove the center console, then the mid console peice by removing the screws on the side and such, pulling it off the shifter and the taking the boot out, placing the new one in and putting it all back together
05-10-2006, 10:03 AM
#3
On permanent hiatus
Join Date: Jul 2004
Location: A forum with actual tech
Posts: 9,716
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by sherwood
i'd imgine that you wold have to first unscrew the shifter knob then remove the center console, then the mid console peice by removing the screws on the side and such, pulling it off the shifter and the taking the boot out, placing the new one in and putting it all back together
05-10-2006, 12:21 PM
#4
7M-GTE!!!! "U-BLOC BITCH"
Thread Starter
Join Date: Dec 2005
Location: O.T. CAN
Posts: 344
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Däs Schmoo
Yep. Just pull out the console and unscrew the boot from underneath.
SOlid so its a super simple task
thanks guys
05-10-2006, 06:19 PM
#5
www.ufc.com
Join Date: Sep 2004
Location: Irvine CA
Posts: 2,920
Likes: 0
Received 0 Likes
on
0 Posts
1. Undo the shift knob.
2. From the back of the center console undo the 2 retaining screws on both sides.
3. Pop that cover off where the ebrake handle drops and take out those screws.
4. By now you should be able to lift the whole backside of the console out.
5. Remove the retaining screws on front left and right side of the front of the center console and pop it off.
6. Without undoing the cigarette lighter you should be able to tip that part high enough to undo the 4 screws holding the bag to the retaining frame that screws to the underside of the console.
7. Once that is out sit back, take a look at it and remember how the bag in woven in and out of the metal prongs.
8. Take the old bag out, put the new bag in and retrace your steps to re-install everything.
2. From the back of the center console undo the 2 retaining screws on both sides.
3. Pop that cover off where the ebrake handle drops and take out those screws.
4. By now you should be able to lift the whole backside of the console out.
5. Remove the retaining screws on front left and right side of the front of the center console and pop it off.
6. Without undoing the cigarette lighter you should be able to tip that part high enough to undo the 4 screws holding the bag to the retaining frame that screws to the underside of the console.
7. Once that is out sit back, take a look at it and remember how the bag in woven in and out of the metal prongs.
8. Take the old bag out, put the new bag in and retrace your steps to re-install everything.
