sorry i made a post int the engine section but i figure you integra guys can help me out https://www.honda-acura.net/forums/s...71#post2863271 plz read it and give me some advice

 

about the throttle cable, you need to figure what will work, if its too short and there is not enough slack, you need another one, and if there is too much slack, you need to shorten it. i just completed a jdm gsr into my 94 integ, and the throttle was to long, i shortedned it by cutting off the stopper by the pedal along with some wire, and putting a new stopper on.

what model is your integra, what is the stock engine? certain things such as the butterflys will have to be wired in separatly if your stock engine was a b18a/b. make sure to wire everything in before attempting to start, do NOT skimp out on something and hope your engine will be fine. everything is there for a reason. if you havent already, i would invest in a helms manual, it will tell you everything you need to know. if you have a.i.m. i m me on quikflip27 if you have more questions
quikflip

 

Since the thread in Engine Tech is still open, please reply to that thread directly.

I cannot merge replies from this thread into the one that is already open, so in the interest of keeping things organized, this thread is now :closed:.