Upgraded MAP?
#1
How do my taillights look
Thread Starter
Join Date: Aug 2005
Location: The Big Buff
Posts: 1,388
Likes: 0
Received 0 Likes
on
0 Posts
Upgraded MAP?
I believe the stock MAP on the GSR can read 10psi max. If i run 10psi daily and get a spike in boost for some reason the computer wont see the air coming in and wont and fuel......which will blow the motor tight? WELL ant aftermarket MAP i can get that will let me ready something like 20psi'ish for future upgrades and psi increases? BTW how hard are they to install and WHERE IS IT. thanks guys
#3
On permanent hiatus
Join Date: Jul 2004
Location: A forum with actual tech
Posts: 9,716
Likes: 0
Received 0 Likes
on
0 Posts
3 bar MAP sensor.
I am running 11 psi on the stock sensor. It maxes out at 11.2 psi. A boost spike won't affect anything unless it is a pretty large one. I have spiked up to 12.6 psi and there was no CEL.
I have a 3.5 bar Zeitronix MAP sensor that will be put in when I decide on rescaling all the maps and retuning.
I am running 11 psi on the stock sensor. It maxes out at 11.2 psi. A boost spike won't affect anything unless it is a pretty large one. I have spiked up to 12.6 psi and there was no CEL.
I have a 3.5 bar Zeitronix MAP sensor that will be put in when I decide on rescaling all the maps and retuning.
#6
On permanent hiatus
Join Date: Jul 2004
Location: A forum with actual tech
Posts: 9,716
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by rugsr
so for now is there even a reason to get a 3bar MAP? should i just wait till i build the block. ill be driving it on 10psi daily.