Here is my FMIC I got today. I pretty much got it for free, I traded a black 240sx dash for this, which I got the car for free so I made out. My buddy who I traded the dash got it with a sr20det setup, but went for a bigger FMIC. I believe its originally off a Evo, but what do i know?

The dimensions are 29'' total at the widest points...19'' long middle section...9'' high, and 2 1/4 thick. Big enough?

No idea the brand, but ill be at no more than 250whp and that wont be everyday.

My current setup is ramhorn (got cheap from a friend), 3'' kteller exhaust, 38mm tial and thats all I have currently. Cant decide between a .48ar t3/t4 or a .63ar still.

oops forgot pic

 

Definitely big enough.

Good luck mounting the piping on those angled inlet/outlets.

 

yeah im not really worried about that, in person you can see that along with being angled down one is angled in a bit and the other angled out a bit. It shouldnt be a problem Im just going to buy all the piping myself, cut it and tig it where need be to use as little couplers as possible.

Use aluminum piping all around, or steel instead?
also what size piping should I run? OD of the inlet and outlet are 2 1/2'', I think ID was something like 2 1/8-2 1/4''

Well only thing left is to determine the turbo still