Speedometer stopped working
03-14-2006, 09:37 AM
#1
Junior Member
Thread Starter
Join Date: Mar 2006
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Speedometer stopped working
I have a 98 GS and the speedometer stopped working, the drive light started flashing, and the check engine light came on- any ideas as to how to remedy the problem? Thank you for your help.
03-14-2006, 02:28 PM
#3
Apathy Kills
Or pull the CEL code yourself.
Click on the "Integra FAQ Thread" link in my sig.. then scroll down to the CEL code retrieval post. Follow those instructions, record the code (or codes) belched out by the ECU, look them up in the table and come back here.
Click on the "Integra FAQ Thread" link in my sig.. then scroll down to the CEL code retrieval post. Follow those instructions, record the code (or codes) belched out by the ECU, look them up in the table and come back here.
__________________
:: :ToDspin: - supermod - but who gives a shit?
:: HAN Integra FAQ: If, by some miracle, yours hasn't been stolen... check it out!
:: HAN Integra FAQ: If, by some miracle, yours hasn't been stolen... check it out!
03-14-2006, 02:50 PM
#4
Senior Member
Join Date: Nov 2002
Location: Orlando, FL
Posts: 1,975
Likes: 0
Received 0 Likes
on
0 Posts
A flashing drive light on a automatic transmission means that the computer for the auto transmission has detected a fault in its system. I would take a guess and say its the vehicle speed sensor but you need to get the ecu scanned for the engine code and go from there.
03-15-2006, 07:32 AM
#7
Acura Nubbins
Join Date: Jan 2005
Location: New England
Posts: 436
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by RSXt3
ill bet money its the speed sensor go pick one up at the junk yard for $10-
$20
$20
Just tossing in my .02 that something else may not be out of the question, though that'd be the first thing I checked as well...
best of luck, keep us updated.
03-15-2006, 09:04 AM
#8
Senior Member
Join Date: Nov 2002
Location: Orlando, FL
Posts: 1,975
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Ninj4r
When i swapped my clutch out, I forgot to plug my speed sensor back in, and I didn't get a CEL or Drive light..
Just tossing in my .02 that something else may not be out of the question, though that'd be the first thing I checked as well...
best of luck, keep us updated.
Just tossing in my .02 that something else may not be out of the question, though that'd be the first thing I checked as well...
best of luck, keep us updated.