I just got an h22a and i have heard that you can use the b series axles, get a gsr wiring harness, and just get the motor mounts. that sounds to easy. if it that easy then i will have it in over the weekend, if not does anybody have any links for this setup.

thanks,

Mrproul

 

check the hybrid forum

 

You'll need the mount kit. You'll need an accord/prelude shifter. You'll have to cut the floorboard to run the cable shift linkage. You'll have to remove the upper tranny mount from the passenger side frame rail. You'll need a prelude intermediate shaft. You'll need 90-93 integra axles, or custom axles...I'd recommend custom...HASport sells some for the swap.

Here's a list from HASport.

http://www.hasport.com/Tech/Installs...%20Integra.htm

Here's a mount install guide:

http://www.hasport.com/Tech/Installs/egh1.PDF