Notices

90 Integra LS problem

Thread Tools
 
Old 02-16-2006, 07:35 PM
  #1  
Will29
Junior Member
Thread Starter
 
Will29's Avatar
 
Join Date: Feb 2006
Location: Valdosta, GA
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default 90 Integra LS problem

Hi folks...

my car was running well and normally as recently as two days ago, but today when I went to start it...nothing....no radio, no lights, no attenna, and most importantly, no attempt by the engine to start.

The only thing I have done lately is replace the air filter, and I checked all of the battery connections. Just for the heck of it, I got a jump start and it worked fine, but when i tried to restart it, again nothing...

any ideas?
thanks in advance...
Old 02-16-2006, 07:40 PM
  #2  
Driverman5777
Senior Member
 
Driverman5777's Avatar
 
Join Date: Sep 2005
Location: Hagerstown MD
Posts: 1,769
Likes: 0
Received 0 Likes on 0 Posts
Default

maybe ur battery is dead, that or ur alternator is gone but either way ur battery is dead.

Last edited by Driverman5777; 02-16-2006 at 07:47 PM.
Old 02-16-2006, 07:43 PM
  #3  
Will29
Junior Member
Thread Starter
 
Will29's Avatar
 
Join Date: Feb 2006
Location: Valdosta, GA
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default

I put a new battery in, same results....i guess ill have to get a new alternator....thx...
Old 02-16-2006, 07:46 PM
  #4  
Driverman5777
Senior Member
 
Driverman5777's Avatar
 
Join Date: Sep 2005
Location: Hagerstown MD
Posts: 1,769
Likes: 0
Received 0 Likes on 0 Posts
Default

yep sorry u lost another battery but if it jumped right up, wait how long did u leave it running after u jumped it? If ur alternator is bad, depending on what u had on it woulden't stay running for long, you could also have a lose circuit somewhere draining power(ie. Headlights, interior lights, loose circuits, etc.) Anyway Welcome to HAN

Last edited by Driverman5777; 02-16-2006 at 07:51 PM.
Old 02-17-2006, 08:32 PM
  #5  
ginomobile/teg
Member
 
ginomobile/teg's Avatar
 
Join Date: Aug 2004
Posts: 96
Likes: 0
Received 0 Likes on 0 Posts
Default

the contacts inside of your ingnition switch could be corroded. i had the same problem with my 90 ls and i took it apart and gently sanded down the contact points and it works like a dream now. just a thought...good luck
Old 02-20-2006, 05:02 PM
  #6  
Will29
Junior Member
Thread Starter
 
Will29's Avatar
 
Join Date: Feb 2006
Location: Valdosta, GA
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default

I had a blown fuse....I wish Id checked that first...now everything is back to normal...thanks for the suggestions




All times are GMT -8. The time now is 01:06 PM.