Ok, I have decided to take a friends 1988 acura integra that was being sent to the junk yard for whatever reason! (only the trans has issues)

I would like to get some advice on what I should do with this motor.

D16a1 motor!
1) what heads should I look at getting? (what will work? Please include a link to a site if possible)
2) Will I be able to turbo this motor

Auto Trans (switching to a 5 speed)

It will not be a daily driver as I already have daily drivers just wanted to get some speed into it and have fun when at the track or at a light.

 

Truthfully I would just swap in a B series motor. I leaves u w/ alot more potential.

 

Thanx.....

 

If your looking for direct bolt in affair you can pick up a zc motor and tranny or just the motor and it will frop in place and bolt up to the tranny. You'll have to put a new clutch too, the stock clutch won't hold too well on the zc if it is old and worn.

 

If your looking for direct bolt in affair you can pick up a zc motor and tranny and it will drop in place and bolt right in. You'll have to put a new clutch too, the stock clutch won't hold too well on the zc if it is old and worn.