Turbo Help! - 95 GSR
02-05-2006, 08:14 AM
#1
Junior Member
Thread Starter
Join Date: Feb 2006
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Turbo Help! - 95 GSR
Okay so my first post will be here.
I have a 95 Integra GSR that I am building a custom turbo kit to. I have all the parts and have tons of fabricating experience, but only one thing leaves me guessing.
I am wondering what type of spool I will see from a full T04 turbo with a V1/V2 Trim compressor and a .58 A/R P Trim turbine set-up. I know the Stage III wheel is better for spool, but I have a brand new full T04 unit with the .58 turbine housing that I would rather use, instead of building a hybrid unit. I look at the Turbo Matrix and Turbonetics uses the P Trim and .58 A/R turbine housing with a 72mm compressor to manke 700 HP. In no way do I need that, just a turbo I know will spool this century.
Are any of you guys running a full T04 with a P Trim turbine on a 1.8L on the street?
Any help you can shoot my way would be awesome.
Thanks..
-Lance
I have a 95 Integra GSR that I am building a custom turbo kit to. I have all the parts and have tons of fabricating experience, but only one thing leaves me guessing.
I am wondering what type of spool I will see from a full T04 turbo with a V1/V2 Trim compressor and a .58 A/R P Trim turbine set-up. I know the Stage III wheel is better for spool, but I have a brand new full T04 unit with the .58 turbine housing that I would rather use, instead of building a hybrid unit. I look at the Turbo Matrix and Turbonetics uses the P Trim and .58 A/R turbine housing with a 72mm compressor to manke 700 HP. In no way do I need that, just a turbo I know will spool this century.
Are any of you guys running a full T04 with a P Trim turbine on a 1.8L on the street?
Any help you can shoot my way would be awesome.
Thanks..
-Lance
02-10-2006, 07:51 PM
#3
Junior Member
Thread Starter
Join Date: Feb 2006
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Just some info..
I bought a 72 trim T3 turbine (OEM cut) with .48 A/R turbine housing, flowing into a 3 inch custom DP. Should spool nice and pull to red-line. All this is matting to a V1 (59mm) compressor. Should be putting it together Saturday! Wish me luck!
-Lance
I bought a 72 trim T3 turbine (OEM cut) with .48 A/R turbine housing, flowing into a 3 inch custom DP. Should spool nice and pull to red-line. All this is matting to a V1 (59mm) compressor. Should be putting it together Saturday! Wish me luck!
-Lance