How do I get a 89 Integra LS radiator off?
11-28-2005, 08:32 AM
#1
Registered User
Thread Starter
Join Date: Nov 2005
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
How do I get a 89 Integra LS radiator off?
Do I have to jack the car up and also how many bolts are there holding it in place and is there any bolts that I have to take off in the bottom. Also another question is that do I have to take fans out or do they stand in place by themselves and all that good stuff sooo please give me as much information as you can. thanks a lot
11-29-2005, 11:57 AM
#2
Still Water
Join Date: Aug 2004
Location: San Diego
Posts: 1,236
Likes: 0
Received 0 Likes
on
0 Posts
It's very easy and straight forward. Once you get your new radiator, just start unbolting stuff and until your able to slide the radiator out. your fans are bolted to the radiator so it will come out and you'll need to re-use them (also you just need to disconnect some plugs).
it's very easy and have a bucket ready to catch all the coolant. Once again, just start unbolting stuff and follow the basica guideline that the link below says.
here;s a good Diy:http://www.team-integra.net/sections...?ArticleID=520
it's very easy and have a bucket ready to catch all the coolant. Once again, just start unbolting stuff and follow the basica guideline that the link below says.
here;s a good Diy:http://www.team-integra.net/sections...?ArticleID=520