what size are 94 and up teg brakes front and rear...

what all can my eg benefits from the teg suspension...

I know that the entire front brake asembly as well as rear with sway bar....do tegs have front sways???

I'll be getting a full teg suspension...I mean everything so what should I take off and put on my car....

Basically I'm getting a rolling suspension ..muaahahahah

 

Tegs have 10.4" front discs and 9.5" rears. The front swaybar on 94-97 (I think...might be up til '96 or '98) RS/LS/GS is 22mm, everything else is 24mm. Rear, all of em have a 14mm except the ITR which is 22mm. The lower control arms, trailing arms, hubs, brakes and swaybars should all bolt up. If you use the teg shocks/springs it will raise your car up about 3/4 inch.

 

get soem bigger brakes in the back so you can left foot brake it thats advanced technique.

 

haha...left foot braking would be ****ing awsome..but I just paid a ticket today don't need anymore...lol

Thanks bro for the info...what if I just use the struts and not the springs...I have sprint performance drop springs...

any idea how big my vx rotors are up front??

 

VX rotors are 9.5" but thicker than teg rears. Keep in mind that when you swap over to teg brakes you get bigger calipers as well as bigger rotors.

You could use the teg shocks with the Sprint springs but you won't see enough of a difference to make taking the springs off the Civic shocks worth it.

 

I thought the RS/LS/GS 2DR coupe was only 12.8mm rear swaybar, the GSR is and sedans have 14mm rear

 

I"m swap out the struts cuz my civic struts are blown....so I will see an improvement.......

my front rotors are 9.5 and the teg rears are 9.5 also?? can I use my vx front rotors on the teg rears?? cuz I have brembo slotted/drilled rotors...

what size rims to I need to clear the new calipoer...cuz I doubt my 13in vx alloys will do the job!!

Thanks guys keep the info coming....