ok b20VTEC part2
Thread Starter
Seni
Joined: Aug 2003
Posts: 3,401
Likes: 0
From: N.Y. Queens
ok b20VTEC part2
Ok I took off the head and all the valves seem to be fine. I looked at the bottom and everything seemed ok. What do you think? When I installed the B20VTEC motor into my tegra it seemed to fire up just fine then the next day you can see that the Cylinder next to the Distro was not firing. YOu can see gas coming out the muffler and also if reved past 4k you can hear like a rock or something of that mature shacking around. But there is nothing in the motor. Please help!!!!!
Apathy Kills
Joined: Nov 2002
Posts: 60,714
Likes: 0
From: The Left Lane
Piston slap?
Rod bearing seizure?
Con rod bolt failure?
Main bearings out of round?
There are many critical tolerances that could be the source of a knocking or even a dull popping sound... pics would definitely help?
Forgive me, but were you able to get compression numbers before taking the head off?
h:
Rod bearing seizure?
Con rod bolt failure?
Main bearings out of round?
There are many critical tolerances that could be the source of a knocking or even a dull popping sound... pics would definitely help?
Forgive me, but were you able to get compression numbers before taking the head off?
h:
__________________
:: :ToDspin: - supermod - but who gives a shit?
:: HAN Integra FAQ: If, by some miracle, yours hasn't been stolen... check it out!
:: HAN Integra FAQ: If, by some miracle, yours hasn't been stolen... check it out!
Registered User
Joined: Aug 2005
Posts: 1
Likes: 0
check the ECU
Originally Posted by honura
Ok I took off the head and all the valves seem to be fine. I looked at the bottom and everything seemed ok. What do you think? When I installed the B20VTEC motor into my tegra it seemed to fire up just fine then the next day you can see that the Cylinder next to the Distro was not firing. YOu can see gas coming out the muffler and also if reved past 4k you can hear like a rock or something of that mature shacking around. But there is nothing in the motor. Please help!!!!!
Thread Starter
Seni
Joined: Aug 2003
Posts: 3,401
Likes: 0
From: N.Y. Queens
Well I was putting the head back together and it turns out Im getting some ITR cams this frieday. So I left everything along and Im gonna finish working on it this frieday. I will keep everyone posted. Thanks