Im installing new door speakers, and the wiring for the stock harness doesn't seem to work. Also, I can't seem to find the wires for the doors at the harness anyways. Plus, I am going to be amping the speakers, so I will have to run my own wiring it appears. How do I route it through the door into the car? Looks like Im going to have to take the door panels off, how do you do this?

 

to take the door panels off you have to unscrew the screw that holds the what i call change collector on your door and theres another screw where the door handles are. then you just pop the door of carefully so you don't break a clip....Me personally i'd just try to get some oem speakers so i don't have to cut the stock wiring, but then again you might be going for a sick sound system. Goodluck with the install

 

Here's a good diy

http://www.team-integra.net/sections...?ArticleID=865

 

You can buy harnesses that just plug in and stuff. Like 2.50 or something.. Go to Best Buy or Circuit City and ask for speaker harnesses for your car.

 

good diy :thumbup:

 

bah dont buy a harness if your good and sodering splice yourself, i hooked up audiobann speakers and tweets with crossovers and a 900wat for the speakers and a extra 2 on my trunk cover.... it was easy all simple match the wiresjust make sure u go slow if u have to cut the door its never a good thing for the bracket to be loose
gl hope it goes well