Tires

Reply Subscribe

Thread Tools

Jun 18, 2005 | 10:27 AM

uneeq

Thread Starter

Registered User

Joined: Jun 2005

Posts: 1

Likes: 0

Tires

Need opinions. I plan on getting new tires for my stock integra ls wheels, thinkin bout putting on 205/50/15. Not sure if that is tooo much rubber for my wheels. Anybody agree or disagree. Any opinion would be helpful.

Jun 18, 2005 | 08:46 PM

TeHJuSTiN

NAM #0001

Joined: Jun 2002

Posts: 4,050

Likes: 0

From: Cornelius, NC

No, I have a friend who runs 205/50/15's no problem, and I have them on my Si rims.

Jun 18, 2005 | 10:38 PM

Provocateur

On permanent hiatus

Joined: Jul 2004

Posts: 9,716

Likes: 0

From: A forum with actual tech

Do you have a drop at all?

I am running those size but I rub on hard turns because of my 1.75" drop.

Jun 19, 2005 | 07:47 AM

BONE

Senior Member

Joined: Jan 2004

Posts: 1,008

Likes: 0

From: Silver Spring, MD

You should be fine with that size thats what I have.

Jun 19, 2005 | 10:25 AM

TeHJuSTiN

NAM #0001

Joined: Jun 2002

Posts: 4,050

Likes: 0

From: Cornelius, NC

Quote:

Originally Posted by Shmoo

Do you have a drop at all?

I am running those size but I rub on hard turns because of my 1.75" drop.

c_rogue runs them and he's tucking the front. Of course he has a lot of camber, but he doesn't rub at all.

Jun 19, 2005 | 02:03 PM

Provocateur

On permanent hiatus

Joined: Jul 2004

Posts: 9,716

Likes: 0

From: A forum with actual tech

I have very little camber in the front, so that is probably why I rub in the front.

Jun 22, 2005 | 09:06 AM

sstearns2

Member

Joined: Nov 2003

Posts: 60

Likes: 0

From: Southren California

I have the GS-R blades on my 2000 and the 205-50's fit just fine. I've been running them for 50K miles.

Scott

Jun 22, 2005 | 12:46 PM

96tegse

'06 Mazdaspeed6 GT

Joined: Oct 2003

Posts: 93

Likes: 0

From: Fairfax, VA

I used to run those on my Teg. The outer diameter is a little smaller and it will increase wheel gap noticibly if you're not lowered. 205's will bulge, but it looks ok.