Which engine.
I'm thinking of getting an Integra, and I was wondering which model is easier to turbo. Should I get the LS or go spend the extra cash for the GS-R, both of them '95. Just need peoples opinions on which engine is more flexible and if the extra cash is worth it for the VTEC.
Originally Posted by flatliner
just do the ls/vtec head swap.
A stock GSR head is going to flow better than a stock RS/LS/GS head.
The GSR has a higher redline than the RS/LS/GS motor.
Both of these factors combine to make the GSR more efficient than the non-VTEC motors at a fixed boost level.
So if all you plan to do is build a decent streetable setup without going inside the motor.. go with the GSR.
But if you plan on tearing down the motor to build for a high-boost (12 psi+) build..then an non-VTEC Integra will do fine. The money saved by going with a DC4 can go into headwork and cams that will address the inefficiencies of the stock LS head.
The GSR has a higher redline than the RS/LS/GS motor.
Both of these factors combine to make the GSR more efficient than the non-VTEC motors at a fixed boost level.
So if all you plan to do is build a decent streetable setup without going inside the motor.. go with the GSR.
But if you plan on tearing down the motor to build for a high-boost (12 psi+) build..then an non-VTEC Integra will do fine. The money saved by going with a DC4 can go into headwork and cams that will address the inefficiencies of the stock LS head.
__________________
:: :ToDspin: - supermod - but who gives a shit?
:: HAN Integra FAQ: If, by some miracle, yours hasn't been stolen... check it out!
:: HAN Integra FAQ: If, by some miracle, yours hasn't been stolen... check it out!


