Notices

Shark Attack II Installation Question

Thread Tools
 
Old Mar 14, 2005 | 06:28 AM
  #11  
eleveill's Avatar
eleveill
Thread Starter
Taket
 
Joined: Dec 2004
Posts: 24
Likes: 0
Default

Ok, this antenna works great!!! It's definitely much better than the stock antenna. I just travelled between Ottawa and Montreal (2h) and I could listen to my favorites radio stations over a much longer distance. The reception quality is excellent and this AMP is doing it's job since the antenna is so small!!!

I bought mine for LoCustom.com and I was satisfied with their service. I e-mailed them a few times and they were quick at answering me back.

With respect to the wire connections:

Shark Attack II Wires:
- Red wire (you need to connect it to the power wire (12V)).
- Black thick wire (It's the antenna)

My Car Wires from 97 Integra GS:
- Red wire (12V)
- Green wire with yellow stripes (12V)
- Black wire (Ground)
- Black thick wire (It's the antenna)

The important thing here is that you solder your wires together. Originally, I only twisted them together and that's why my reception wasn't so good. In my case, I soldered the Red wire from the Shark Attack II with the Red wire (12V) of my Teg. I also connected the two black thick wires together (Antenna).

Buy it if you like the style!!!
Reply
Old Mar 14, 2005 | 12:27 PM
  #12  
Vanishing's Avatar
Vanishing
Registered User
 
Joined: Jun 2004
Posts: 55
Likes: 0
Default

Haha all I did on my II was plug in the black antenna wire, works good enough for me.. not that I listen to the radio very much. Pretty much just for looks..
Reply




All times are GMT -8. The time now is 07:22 AM.