do you guys think if i were to go with some....Eibach Sportline Performance Springs, Camber Kits Skunk2 Front Upper Control Arms, and Skunk2 Racing Upper Front Strut Bars...would that be a nice setup?

 

throw in some nice shocks and its a decent setup

 

http://www.modacar.com/products/Acura/Integra/MODASHS/

do those struts come with springs? so if they were to come with spring wuld i just use those? instead of the sportlines? if so i'd get those and and skunk 2 front upper control arm chamber kit?? wuld that be right?

 

or maybe the cheaper way....KYB AGX High Performance Shocks/ Strut / KYB AGX Struts (if they come with springs...not sure...) and Camber Kits Skunk2 Front Upper Control Arms...wuld that be good?

 

shocks and springs are two seperate things. they dont come together. unless you buy a full coilover shock/spring set. but those are $$$.

 

so fro like 600 bucks tell me wut u think i shuld get...

 

well....around 600

 

You also need a rear camber kit since the camber will most likely be more out of spec after lowering in the rear than in the front. I have KYB AGX shocks with Neuspeed race springs and ingalls camber kit in the rear and Skunk 2 in the front. I love the setup. It was cheap and it handles like a dream. For a less aggressive drop, I would recommend the Neuspeed sport springs. The stock GSR strut bar in the front is all you will need, then get a Comptech swaybar-tie bar combo and it will really handle nicely. The whole setup will run you over $500 but it is far better than any engine upgrade that you can buy for $500.

 

if i were to buy KYB AGX High Performance Shocks/ Strut / KYB AGX Struts and Lowering Springs Eibach Sportline Performance Springs...wuld that be a good setup? or do i need the chamber kits?

 

You will need camber kits. The drop is 1.7" and my philosophy is: 1"-1.5" drop will need camber kits if alignment shop says so and 1.5"+ will need camber kits regardless.