Originally Posted by hj788

I'd stay away from the terry cloth. Those can really leave some swirl marks, which show up prominently on dark cars. www.autopia-carcare.com sells really good products you aren't going to find at a place like autozone. I would get a good drying towel and buffing towels from there. They have some awesome how-to articles too. Wash and clay again...that will get the paint clean for a polish. Wax or sealant isn't going to do anything for swirl marks (other than hide them a little)...to get rid of those you'll have to use something with some abrasiveness like meg's #83, which really should only be applied by machine (a porter cable polisher is about $140). The Sonus SFX-2 can be used by hand and should work pretty well. Using a polish isn't something you'd want to do very often as it actually will remove a little of the clear to remove those swirls. I'd try a hand polish like the Sonus or ScratchX after the clay. That should help remove some swirls and oxidization and isn't too abrasive. I really like Meguiars NXT for a wax because it really does a good job of filling and hiding the swirl marks that remain. I'd keep applying NXT once a month. It buffs off so easy so you can wax your car in no time. If you have harsh winters and it's a b*tch to get out and do anything with your car, use Klasse Sealant Glaze instead of a wax. Apply really thin, let sit for at least 1 hour and buff off. Wait a week for the next coat. Put 2 or 3 coats on it..this stuff is really durable and long lasting compared to a wax. It will keep your paint protected for many months during a harsh winter..

Originally Posted by EviLLLLSiNz

welcome to HAN, did u take off the "dohc vtec" logo out from your car? i was thinkin about doing that

Originally Posted by danteisme

wow this is the first forum ive been on that no one has asked if my plate was photoshopped.

Originally Posted by LT6916

IBDB>DCcomment :chuckles:

welcome. i'm on TI as well....

*edit: whereabout in PA are you?