Honda-Acura.net

Honda-Acura.net (https://www.honda-acura.net/forums/index.php)
-   Integra & 97-01 Integra Type-R (https://www.honda-acura.net/forums/integra-and-97-01-integra-type-r-17/)
-   -   Help me run low 14's on my 94' LS!? (https://www.honda-acura.net/forums/integra-and-97-01-integra-type-r/170146-help-me-run-low-14s-on-my-94-ls.html)

slapmaho Dec 30, 2004 02:29 AM

Help me run low 14's on my 94' LS!?
 
94' LS 5spd 80kmiles, I have AEM SRI, 205/40/R17/80H tires, on light alloys

What NA parts do you guys suggest I buy to get me into 14's?!?

thanks

bluetwo Dec 30, 2004 03:02 AM

NAs man! Just kidding. I guess I'm just feelin a little goofy this morning.

muscldancr Dec 30, 2004 05:17 AM

Cams

CD7junky Dec 30, 2004 05:26 AM

I know someone with the same situation. His Teggy runs 14s, but he sent both the motor and tranny away somewhere to have the work done. All together he spent 3K each on the tranny and motor.

ISP James Dec 30, 2004 06:56 AM

cams and compression will get you on your way. then tune.

but nitrous would make it far easier.

also look into a shorter ratio tranny, an ITR would be your best bet (LSD mmm) but you could go with a 99-00 Si or GS-R tranny as well.

carta79 Dec 30, 2004 07:49 AM

What's your budget?

You will need your powerband to be located in the upper rpms. The problem with the LS head is that it takes a nose dive after 6000 rpms.

Edit: When you put together an engine package, look for parts that will aid top end power

ISP James Dec 30, 2004 07:50 AM


Originally Posted by carta79
What's your budget?

You will need your powerband to be located in the upper rpms. The problem with the LS head is that it takes a nose dive after 6000 rpms.

not with some 404's and dual springs ;)

carta79 Dec 30, 2004 08:25 AM

Nobody stated they had 404's and dual springs. There's more to an engine package then just cams and valve springs if you want to get into the 14's. What about adjustable cam gears, forged pistons, or a port and polish. No budget has been stated remember.


budget/ peak whp?

ISP James Dec 30, 2004 08:28 AM


Originally Posted by carta79
Nobody stated they had 404's and dual springs. There's more to an engine package then just cams and valve springs if you want to get into the 14's. What about adjustable cam gears, forged pistons, or a port and polish. No budget has been stated remember.


budget/ peak whp?

take it easy, cowboy.

he asked how to get into the 14's.

you said that an LS head cant make power over 6k.

previous to that post, i recommend cams and compression.

with 404's and dual valve springs, an LS head makes power over 6k.

carta79 Dec 30, 2004 08:35 AM

I'm taking it easy. ;)
I didn't say the head "can't" make power past 6000 rpms, in stock form the power nosedives.


All times are GMT -8. The time now is 10:05 PM.


© 2026 MH Sub I, LLC dba Internet Brands