Notices

Hazard Lights not working

Old Dec 10, 2004 | 09:43 AM
  #1  
eleveill's Avatar
eleveill
Thread Starter
Taket
 
Joined: Dec 2004
Posts: 24
Likes: 0
Default Hazard Lights not working

The hazard lights aren't working when I press the hazard button. Left and right flashers work fine. I checked the 10A fuse labeled "hazard" underneath the hood and it's ok. Any idea(s) how to fix this problem?
Reply
Old Dec 10, 2004 | 09:53 AM
  #2  
ADRONICUS's Avatar
ADRONICUS
www.ufc.com
 
Joined: Sep 2004
Posts: 2,920
Likes: 0
From: Irvine CA
Default

Sounds like your switch is failing either by way of the switch being grounded or it just isn't a functional switch. Obviously the lights are good & grounded. I would start with the switch. I had a similar problem w/my sunroof switch. It would open but not close. Replaced the switch and it has worked fine since.
Reply
Old Dec 10, 2004 | 10:04 AM
  #3  
eleveill's Avatar
eleveill
Thread Starter
Taket
 
Joined: Dec 2004
Posts: 24
Likes: 0
Default

How do I get to the switch? Do I have to remove the hazard plastic button? If so, how do I do that?
Reply
Old Dec 10, 2004 | 03:32 PM
  #4  
ADRONICUS's Avatar
ADRONICUS
www.ufc.com
 
Joined: Sep 2004
Posts: 2,920
Likes: 0
From: Irvine CA
Default

1 of two ways I believe. The button may come off if you pull on it and expose screws or you may have to remove the center console and get behind it. My sunroof switch popped out. But I've seen how Hondas/Acura does shit and these seems like a way to try. Good luck.
Reply
Old Dec 10, 2004 | 03:36 PM
  #5  
Epoch's Avatar
Epoch
CHRISTMASTIME IN IRAQ
 
Joined: Apr 2003
Posts: 12,413
Likes: 0
From: Bay Area
Default

Isn't the hazard switch also a relay? You can check the resistances of that, but I have no idea how to...
Reply



All times are GMT -8. The time now is 12:28 PM.