Hi all.

I have automate alarm/keyless installed on my integra. Usually when I open the car, it makes two "beep-beep" sound and also makes the same sound when I open the car.

However these days, it doesn't make that noise anymore. I have no clue why. I know nothing about these keyless entry systems.

Can someone give me an idea?

 

try following the horn inside your engine bay and follow it through your firewall see if theres any unplugged wires or any grounds that have been disconnected. usually these wires disconnect and the horn does not work anymore.

 

Is it after market? If so you may be in valet mode, there usually is a little toggle switch or red button down on the kick panel or on the back of the dash panel near your knees, turn the ignition to on, and press the button, usually ull hear a beep or at least your alarm led will turn off or on. If you know the model of your alarm please post i am a MECP Certified 12v tech. i install alarms and all that fun stuff all day.

 

Hey it's a 3+ model by automate.

I tried to look for the red switch, but couldn't find it.

 

hey never mind, I fixed it.

Thanks for the help bro.