does anyone know how i can solve the problem of my camber kit/control arm hitting the inside of my fender. its hitting on almost every bump that i go over. my car is lowered with eibach sportlines and tokico blue shocks. i was wondering if getting coilovers will solve the problem since my suspension is a little soft and my car rides pretty low. any help/advice would be appreciated.

 

i had that problem also...i just raised it a couple turns. there are actually dents you can see.

get new springs, you have to be pretty close to the ground if the arm is hitting the fender.

 

you got the ingall's camber kit? if so they cause your upper control arm to jut out. If you like your ride height, you could swap to skunk2s control arms that adj. the camber differently

 

Yeah the skunk2 camber kit offers more hardware support and it's more of a complete shape that makes it easier to swap.

 

actually i have a progress camber kit. so raising my car a little will solve the problem for sure? i hope it works, i dont wanna buy another camber kit. thanks for all the advice.

 

I had the same problem with my H&R's and KYB AGX set-up.

It's not the best solution but an air chisel took care of it rather quickly.

 

I don't think the sportlines would lower your car low enough for the arms to hit the inside of the fender. I have sportlines with the tokico blues, but with the ingalls kit and the arms didn't hit my fender. The top of the tire would rub against the fender lip on the rears tho...