Notices

what size speakers?

Thread Tools
 
Old Jan 25, 2004 | 06:16 PM
  #1  
jdm cw type r's Avatar
jdm cw type r
Thread Starter
Registered User
 
Joined: Dec 2002
Posts: 118
Likes: 0
From: CT.
Default

what size speakers are in the front and rear of the type r? thanks
Reply
Old Jan 25, 2004 | 06:41 PM
  #2  
98cwitr's Avatar
98cwitr
Where's the DC5R???
 
Joined: Nov 2002
Posts: 237
Likes: 0
From: Central GA
Default

6.5"
Reply
Old Jan 25, 2004 | 06:44 PM
  #3  
01ITR640's Avatar
01ITR640
Member
 
Joined: Oct 2003
Posts: 60
Likes: 0
From: Missouri
Default

6.5", although I've discovered in the past that not all speakers fit in the integra. Their is not alot of room for a bigger magnet. Also their is very little wire in the rear to work with so it makes it difficult to replace.
Reply
Old Jan 25, 2004 | 06:58 PM
  #4  
Stock97ITR#50's Avatar
Stock97ITR#50
Member
 
Joined: Dec 2002
Posts: 51
Likes: 0
Default

If depth is an issue as it will be for me soon, make mounting plates from plywood to bring the speaker basket out from the door a little so you can still roll the windows down. :wink:
Reply
Old Jan 25, 2004 | 09:50 PM
  #5  
LT6916
Guest
 
Posts: n/a
Default

the front wire harness also is very short, leaving little to work with.
Reply
Old Jan 25, 2004 | 10:42 PM
  #6  
B2FiNiTY's Avatar
B2FiNiTY
Senior Member
 
Joined: Sep 2002
Posts: 290
Likes: 0
Default

I would recommend just cutting the harness and using some nice connectors to connect everything. That way you get a lot more room to play with.
Reply
Old Jan 26, 2004 | 03:35 AM
  #7  
Trey
Guest
 
Posts: n/a
Default

I've found it easiest to use 6" speakers. most aftermarket 6" fit well. I use JL audio and they fit tine with not modification except cutting the stock plastic basket they sit in.

Trey
Reply
Old Jan 26, 2004 | 10:01 AM
  #8  
bbasso
Guest
 
Posts: n/a
Default

I used my dremel to cut the plastic basket to fit my 6.5 speakers in, other then that no other mod was nessary. (for the front)
Reply
Old Jan 26, 2004 | 10:53 AM
  #9  
Trey
Guest
 
Posts: n/a
Default

I used a dremel as well but the JL 6's seem to be a bit oversized. 6.5 woudl never have fit.
Reply
Old Jan 26, 2004 | 11:43 AM
  #10  
bbasso
Guest
 
Posts: n/a
Default

I went with the Pioneer premiers...
Reply



All times are GMT -8. The time now is 09:40 PM.