"test pipe"
#12
Originally Posted by JUN
i just removed my cat and made my own, just welded the correct size pipe in where the cat used to be. and zip tied my O2 sensor to the front sway bar since i didn't have the plug for it in the pipe i made.
#13
Originally Posted by e r i c s 9 9 s i
[quote:11e0e16fc3="JUN"]
i just removed my cat and made my own, just welded the correct size pipe in where the cat used to be. and zip tied my O2 sensor to the front sway bar since i didn't have the plug for it in the pipe i made.
i just removed my cat and made my own, just welded the correct size pipe in where the cat used to be. and zip tied my O2 sensor to the front sway bar since i didn't have the plug for it in the pipe i made.
This didn't work for me. I had to buy an "O2 Simulator". It is just a resistor that you wire into the system to simulate the proper signal from the secondary O2 sensor.
#14
Originally Posted by fredtoast
This didn't work for me. I had to buy an "O2 Simulator". It is just a resistor that you wire into the system to simulate the proper signal from the secondary O2 sensor.
Here's a link I found for others interested...
http://www.casperselectronics.com/cg...?product=HONDA
#15
I got mine at a performance shop in Knoxville, TN called KLR. I think it was about $50. If you know anything about wiring a circuit you can make one really cheaply. The parts are about $5 at radio shack. There was a poat on Honda-tech.com with a diagram on how to make your own.