jdm cw type r

how hard is it to install a jdm front end ? thanks!!!!!!!

sscguy

It's not too bad, generally bolt-on, but you need to weld the radiator support on to do it right, so if you don't/can't weld and weld good, then you'll need a shop to do at least that right. Also, for the bumper reinforcements, sometimes you need to alter the holes a little to make the bumper line up with the headlights right. Not difficult, but a little time consuming. The only other thing that would be anything considered difficult would be rewiring the headlights, but if you know anything about wiring, it's a snap, you're just cutting and splicing.