Right Click -> Save as....
http://www.we-todd-did-racing.com/we...EzZGZkMzF5NTQx

GREAT info source here. MPH at a given RPM, in 100 rpm intervals.

It has LS, JDM LS, JDM ITR, and ITR gearing, plus ATS 3-4-5 gears, ATS FD, and the ability to change any variable to suit your needs.

 

Thanks for sharing Chris...thats a great piece of info!! Very nice use of excel skillz...:thumbup: .

 

:rofl:

wow


:slap:

 

Great chart! but I'm a little confused. According to the chart in 5th gear, 8400 rpm, the ITR will be doing 112.6 mph. It doesn't look right to me, maybe I'm reading wrong. The last time I was in 5th between 6300-7000 rpm I was doing 140 mph...correct me if I'm wrong but if you're at redline, 8400 rpm, you should be at about 150mph.

 

i think the redline of the 4.40 final USDM ITR Transmission is gear limited at 143 mph

 

you can switch between the different tranny charts. the first chart is a usdm itr with ats 1,3,4,5 gears and a 4.928 fd. that is crazy short.

 

Exactly. There are tabs across the bottom, showing the name of each Excel worksheet. The stock USM ITR is shown on the worksheet whose name is ITR. It shows the speed in top gear at redline (8400 RPM) as 153.6 mph.

 

Finally a good reason to use Microhard products

I slightly modifed it for km/h, everybody should go metric
A modest speed of 340km/h in 5th gear at 9500rpm for the LS :woowoo:

BTW great post and thanks for sharing!