I hope I can get some help here....I recently bought a stolen and recovered 96 integra from an insurance auction, but it is missing the engine and axles. It has a 5 lug conversion on it, But I am assuming it is from a teg type r, but I could be very wrong. All of the parts on the coversion are oem parts so I know that there are no custom hubs or anything like that. So far I have no reason to believe that it is not from a type r because it has the rear lower control arms, srings/struts, and possibly the front upper control arms from a type r. But now I am having my doubts because from other posts, people have said that the type r has a diameter of either 32 or 36 mm axles. When I used the caliper to measure the i.d of the hub, it came out to be 29 mm. The standard integra axles are even smaller than that....they measured to be 27 mm. Is there any other possibilities that another type of Honda/Acura hub could have been bolted up to the integra suspension without modifying anything?