shift knob
Wannabe yuppie
Joined: Dec 2000
Posts: 25,918
Likes: 0
From: Madison, WI
Shifters for the '90-'93 and '94-'01 are shaped differently, like so:
The single bend is for '90-'93 and the double bend is for '94-'01. Not all companies make both versions, usually they do one or the other. I know that skunk2 makes both, and B&M makes only the single bend kind but passes it off for all Integras. It also tends to rattle against the exhaust piping so I don't really reccomend it.
The skunk2 can be purchased here for $121. A bit pricey but it's a really nice shifter, as seen in the picture.
The single bend is for '90-'93 and the double bend is for '94-'01. Not all companies make both versions, usually they do one or the other. I know that skunk2 makes both, and B&M makes only the single bend kind but passes it off for all Integras. It also tends to rattle against the exhaust piping so I don't really reccomend it.
The skunk2 can be purchased here for $121. A bit pricey but it's a really nice shifter, as seen in the picture.
LS Master
Joined: Sep 2003
Posts: 112
Likes: 0
From: Orange County
Originally posted by Xymox007
I'm diggin' my SH leather shift knob & boot.
I'm diggin' my SH leather shift knob & boot.
Björkian
Joined: Jul 2003
Posts: 722
Likes: 0
From: Pennsylvania
http://www.handa-accessories.com/preint.html
Took me 10 minutes to install. The stock GSR knob is immitation leather, this one is genuine.
Took me 10 minutes to install. The stock GSR knob is immitation leather, this one is genuine.
Senior Member
Joined: Mar 2002
Posts: 16,353
Likes: 0
From: Ossining, New York
Originally posted by Xymox007
http://www.handa-accessories.com/preint.html
Took me 10 minutes to install. The stock GSR knob is immitation leather, this one is genuine.
http://www.handa-accessories.com/preint.html
Took me 10 minutes to install. The stock GSR knob is immitation leather, this one is genuine.
Thread Starter
Floppy Death! noES!!!
Joined: Oct 2002
Posts: 21,218
Likes: 0
From: Scranton, PA
Originally posted by MrFatbooty
Shifters for the '90-'93 and '94-'01 are shaped differently, like so:
The single bend is for '90-'93 and the double bend is for '94-'01. Not all companies make both versions, usually they do one or the other. I know that skunk2 makes both, and B&M makes only the single bend kind but passes it off for all Integras. It also tends to rattle against the exhaust piping so I don't really reccomend it.
The skunk2 can be purchased here for $121. A bit pricey but it's a really nice shifter, as seen in the picture.
Shifters for the '90-'93 and '94-'01 are shaped differently, like so:
The single bend is for '90-'93 and the double bend is for '94-'01. Not all companies make both versions, usually they do one or the other. I know that skunk2 makes both, and B&M makes only the single bend kind but passes it off for all Integras. It also tends to rattle against the exhaust piping so I don't really reccomend it.
The skunk2 can be purchased here for $121. A bit pricey but it's a really nice shifter, as seen in the picture.
h: that sounded bad.How can I see the look of the shaft but not have the bottom area all open and stuff?
Apathy Kills
Joined: Nov 2002
Posts: 60,714
Likes: 0
From: The Left Lane
^ You like looking at shafts??!? :eh:
:naughty:
:naughty:
__________________
:: :ToDspin: - supermod - but who gives a shit?
:: HAN Integra FAQ: If, by some miracle, yours hasn't been stolen... check it out!
:: HAN Integra FAQ: If, by some miracle, yours hasn't been stolen... check it out!