Ok, here is my predicament. I bought the Tokico suspension kit with Illuminas and Tokico's springs which claim to lower 1.5 all around. My problem is, I don't like the ride height, it seems too low for 1.5. The front is ok, but the back, I only have like maybe one finger gap between the wheel well at most. I want about a 2 finger gap or maybe a little more. What ride height do you guys think that might be and what kind of springs would you guys recommend to give me this height. Thanks a lot.
Jeff

 

H&R OE Springs http://www.adventon.com/acb/showprod...ctGroup_ID=447

3/4 inch drop all around.

 

what if i ride on stock suspension with H&R springs... would it be any good?

what are better : coilovers or springs

 

If you get true coilovers, then they're better than springs.

You could always switch out your H&R springs for some Ground Control coilovers and get some Tokico shocks, you'd be set.

 

You'll be fine, until you hit a pothole, raised concrete, or stone in the road. Then you'll be posting a topic on what type of helmet you should buy.

 

H&R OE and Neuspeed Sofsport both drop a .75 all around. Which springs do you guys recommend? Anybody with pics of these springs on there car? Thanks

 

oh I am glad I did not get that kit. Can you post some pics of how your teg looks with it?

 

sure, give me a couple a days. It's raining here in St. Louis and I am gonna be gone this weekend. Give me til monday and I will get her cleaned up and take some pics.

 

How good do Tokico Illuminas ride with Ground Control? Anybody know?

 

BTW, here are my pics.

Full


Front


Back