What's the proper spark plug gap for the 1gen B16? I've done a few searches nothing really concrete. I've seen some show .051, others .039-.043.
It's NA
Thanks Very Much

 

1.0mm - 1.1mm = 0.039" - 0.043"

 

Thanks jlicrx, that's good to know. So, I can set between that range. When I usually buy my plugs I buy them for the 99-00 Si.

 

just get stock ngk spark plugs from local auto parts store

 

That's the same range for my D16A6. I actually just installed some new NGK's and they were pre-gapped slightly too much. Check the gap before you install the plugs and use a feeler gauge; I don't trust the accuracy of those 'coin-type' spark plug gappers.