GSR head swap
Thread Starter
HotRodAcura
Joined: Jun 2008
Posts: 1
Likes: 0
From: jackson MO 63755 3536 Rie
GSR head swap
What all do i need besides the gsr head. What kinda wireing do i need for it ecu and anything else you can think of.
What I have Is a b18A1 motor .
What I have Is a b18A1 motor .
Last edited by Revline; Jun 17, 2008 at 09:27 PM. Reason: more info
Senior Member
Joined: Oct 2006
Posts: 1,335
Likes: 1
You will need an external vtec kit or go balls out and drill a big ass hole in your block. Use the kit golden eagle. You will need a vtec computer p72 is a gsr. And you will have to wire in vtec 3 wires. Do some research on line its all over the place. I you want get the etm www.hondatech.info
If I was you I would get it tuned. You will have a longer stroke so your engine will pull more air you will probably run a bit lean at WOT.
If I was you I would get it tuned. You will have a longer stroke so your engine will pull more air you will probably run a bit lean at WOT.