Notices
Engine Swaps, Tech & Tuning Swaps, N/A Performance, Forced Induction, Engine Management, & Troubleshooting

2.2 misfire

Thread Tools
 
Old Nov 18, 2007 | 04:20 AM
  #1  
glen53@fuse.net's Avatar
glen53@fuse.net
Thread Starter
Junior Member
 
Joined: Nov 2007
Posts: 3
Likes: 0
Default 2.2 misfire

completely rebuilt 2.2 new clutch ,piston rings everything head rebuilt compr. 170 every cylinder new plugs,wires.dist. cap all replaced.have fire to inject. good spark no.1 cylinder won,t fire at low speeds runs exect at high rpms slow to idle no. one cuts out sbitched inject from 1 to2 same thing 1 won,t fire...................help.davidson1:
Reply
Old Nov 18, 2007 | 06:28 AM
  #2  
talltattoomike's Avatar
talltattoomike
Junior Member
 
Joined: Nov 2007
Posts: 2
Likes: 0
Default

ide check the cap ,rotor,plug wire & spark plug
Reply
Old Nov 18, 2007 | 07:30 AM
  #3  
glen53@fuse.net's Avatar
glen53@fuse.net
Thread Starter
Junior Member
 
Joined: Nov 2007
Posts: 3
Likes: 0
Default

new plugs 2 differ. sets used ngk also bosch plat. new wires good spark right to injectors....car runs reall great went down road 5000 rpms each gear not a miss at all stop at light started not firing again
Reply




All times are GMT -8. The time now is 06:54 AM.