This is permanantly hosted on my site at:
www.lukekailburn.com

How to install a fuel filter mounted Fuel pressure Gauge

The parts
-Teflon wrap the guage threads, and the male threads on the 90* fitting. thats it!


Unscrew your gas cap to relieve some of the fuel pressure


Wrap the banjo bolt with some shop rags and remove the 12mm bango bolt.


Stock bango bolt removed. Clean the surfaces of any debris.


Install the new banjo bolt with new crush washers


Install the 1/8" 90 fitting. Then install the fuel pressure gauge



An overall shot of the setup


Check your fuel pressure at idle with the fpr vacuum hose connected, then check it with the fpr vacuum hose disconnected.



congrats you have successfully installed a fuel filter mounted fuel pressure regulator.


enjoy,

-Luke