I have a quick question,
Does a 98 Gsr and 98 R have the same rack and pinion? just wanted to see if it made any difference & it should bolt right up. correct
Thanks

 

Just wondering did anyone know if they;ll bolt up.. A itr rack 98 itr into a 98 gsr..I'll stay with a gsr but was just asking Thanks.

 

I know they are NOT the same. but not sure whats needed (or not needed) to bolt one in.

 

Thanks for answering Spec R... I did have a question Spec R.. What's a good place to order a Magnaflow high flow cat... My cat is bad... Also is car sound and Maganaflow the same because I always wondered why people call it car sound..... I called Acura to just get an idea of $$ dude told me $1000 although discontinued!! Thanks

 

Just to clear this up for future reference, since I har the same question at one point -

1. 98-01 GSR & ITR are now the same (The ITR part now supersedes GSR part)
2. 94-97 GSR is different, these are not the same, but the ITR part below bolts right in.
3. The ITR Steering rack bolts right up to any GSR subframe.
4. The lowest OEM priced shipped to CA was $550 ($150 core charge):
https://www.hondapartsdirect.com/oem...-06536st7515rm
5. Bolted right up in my 95 GSR.

 

I read from a credible source on this forum that all Integras have the same steering rack, ITR's are NOT quicker even though some brochures say differently.

I drive an Integra for daily/autox/track, and can not stand the slow manual steering rack on EG Civics, especially for autocross!
I've also driven an Integra with the stock rack but the PS disconnected (due to a K20 swap), and it was good to note that the extra effort wasn't a big hindrance for autocross.











Panne batterie